Unpolished sink cut out - FREE OF CHARGE – follow the manufacturers advice on dimensions and installation.
Polished cut out - sink not included - we can provide a polished sink cut out for almost any undermounted sink. We just ask you to make sure the sink is on site when we make the template.
White seamless Wharf Simple sink - 449 x 399 x 208 mm – fits into a 600 mm sink base unit.
* includes cut-out
Polished cut out - sink not included - we can provide a polished sink cut out for almost any undermounted sink. We just ask you to make sure the sink is on site when we make the template.
White seamless Wharf Simple sink - 449 x 399 x 208 mm – fits into a 600 mm sink base unit.
* includes cut-out
sinks - drainer grooves included
Wharf Simple worktops are available with a seamlessly moulded solid surface sink in plain white A001. These look superb and are bonded to the top – say goodbye to silicone sealant, leaks and mould. (Wastes are not included, but are standard 90 mm.)
We can also machine a polished sink cut out to suit almost any undermount sink – just tell us the make and model you are using. (Undermount prices DO NOT include the sink.)
Both these options are supplied with drainer grooves machined into the top - completely FREE OF CHARGE!
We can of course provide an unpolished cut out for an inset sink – FREE OF CHARGE.
Wharf Simple worktops are available with a seamlessly moulded solid surface sink in plain white A001. These look superb and are bonded to the top – say goodbye to silicone sealant, leaks and mould. (Wastes are not included, but are standard 90 mm.)
We can also machine a polished sink cut out to suit almost any undermount sink – just tell us the make and model you are using. (Undermount prices DO NOT include the sink.)
Both these options are supplied with drainer grooves machined into the top - completely FREE OF CHARGE!
We can of course provide an unpolished cut out for an inset sink – FREE OF CHARGE.
Returned ends - if your top butts up to a fridge or oven housing, or the entire end is seen, we provide these FREE OF CHARGE!
Worktop joints - we need to allow for a seamless joint every time your worktop changes direction and on any length over 3000 mm.
Hob cut out - hob cut outs have to be specially formed to meet warranty standards. However, we can’t use flush fit hobs in Wharf Simple worktops.
Additional polished edges - islands and peninsulas need an additional polished edge, so just tell us how long this seen edge is.
50 mm x 12 mm upstands - we supply these by the metre; just let us know the total length you require.
Worktop joints - we need to allow for a seamless joint every time your worktop changes direction and on any length over 3000 mm.
Hob cut out - hob cut outs have to be specially formed to meet warranty standards. However, we can’t use flush fit hobs in Wharf Simple worktops.
Additional polished edges - islands and peninsulas need an additional polished edge, so just tell us how long this seen edge is.
50 mm x 12 mm upstands - we supply these by the metre; just let us know the total length you require.
additional options
To be able to offer Wharf Simple worktops at such fantastic value we have made your choices as simple as we can!
Hob cut outs, finished ends and islands, peninsulas and breakfast bars are all available. We make no charge for finished ends to worktops, and for islands and peninsulas just add the total length of additional edges that are seen. Wharf Simple worktops are joined seamlessly on site, so just let us know how many changes of direction you have and any long lengths.
Upstands can finish off your kitchen worktop, and take the place of tiling. They are simply glued to the wall and worktop using clear silicone. Our upstands are 50 mm x 12 mm.
To be able to offer Wharf Simple worktops at such fantastic value we have made your choices as simple as we can!
Hob cut outs, finished ends and islands, peninsulas and breakfast bars are all available. We make no charge for finished ends to worktops, and for islands and peninsulas just add the total length of additional edges that are seen. Wharf Simple worktops are joined seamlessly on site, so just let us know how many changes of direction you have and any long lengths.
Upstands can finish off your kitchen worktop, and take the place of tiling. They are simply glued to the wall and worktop using clear silicone. Our upstands are 50 mm x 12 mm.
Template - for any top with a change of direction, or if you want us to install, we will template with our laser system. A template is a site survey to accurately measure your worktop.
We reserve the right to reject poorly-made supplied templates.
Install - correctly installed Wharf Simple worktops have joins which are virtually invisible – our install crews are reliable, skilled and wonderful company!
We reserve the right to reject poorly-made supplied templates.
Install - correctly installed Wharf Simple worktops have joins which are virtually invisible – our install crews are reliable, skilled and wonderful company!
template and installation
Because Wharf Simple worktops are seamlessly joined, if your worktop has a change of direction, the chances are we will need to template your units. We do this with a laser, which is very quick and can usually be achieved whilst any existing tops, sinks and hobs are in place. Whilst we can accept your templates, if you want us to install, we normally insist on templating. We all want your top to fit right first time!
Simple straight runs without joins can be supply only, collected or delivered from our factory, or we can supply jointed tops for others to join, but this is a specialised job. To qualify for the warranty, an approved installer needs to fit your tops. Training is available. For the best results and peace of mind - let us fit it!
Tops can be collected from our workshop free of charge, or contact us for a delivery cost to your site. We charge for delivery at cost.
Because Wharf Simple worktops are seamlessly joined, if your worktop has a change of direction, the chances are we will need to template your units. We do this with a laser, which is very quick and can usually be achieved whilst any existing tops, sinks and hobs are in place. Whilst we can accept your templates, if you want us to install, we normally insist on templating. We all want your top to fit right first time!
Simple straight runs without joins can be supply only, collected or delivered from our factory, or we can supply jointed tops for others to join, but this is a specialised job. To qualify for the warranty, an approved installer needs to fit your tops. Training is available. For the best results and peace of mind - let us fit it!
Tops can be collected from our workshop free of charge, or contact us for a delivery cost to your site. We charge for delivery at cost.
Our prices include VAT at the current rate, and are subject to change following a template visit. If an order is cancelled after a template visit has been made, you will be charged for the template visit. Orders cancelled after works have begun are charged in full.
|
||
| How does our cost and quality compare? Click here |
total cost
The cost shown is as accurate as the information you have entered. If, when we make the template, the top is smaller or bigger than you entered, we adjust your quote (our experience is that there is rarely a difference of +/- 10%). To secure your order we require a deposit of 50%, with the balance payable on installation, collection or before delivery. Template charges and deposits are non refundable as this is a bespoke product.
The cost shown is as accurate as the information you have entered. If, when we make the template, the top is smaller or bigger than you entered, we adjust your quote (our experience is that there is rarely a difference of +/- 10%). To secure your order we require a deposit of 50%, with the balance payable on installation, collection or before delivery. Template charges and deposits are non refundable as this is a bespoke product.
Or you can contact us:
Tel 0208 123 8404
Fax 01730 812522
Email sales@simpleworktops.co.uk
If you submit your email address you will automatically receive a reply with your quote.
Tel 0208 123 8404
Fax 01730 812522
Email sales@simpleworktops.co.uk
If you submit your email address you will automatically receive a reply with your quote.
ask us to contact you
You can submit your specification to Wharf Simple by email and we will contact you.
If you need help in completing this form, or you would like us to price the top for you, you can send us a sketch of your top by fax or email. We are always here to help!
If you are a trade customer please call us to set up your login to the trade quotation page.
You can submit your specification to Wharf Simple by email and we will contact you.
If you need help in completing this form, or you would like us to price the top for you, you can send us a sketch of your top by fax or email. We are always here to help!
If you are a trade customer please call us to set up your login to the trade quotation page.
Remember, your Wharf Simple worktop can be any width up to 1000 mm. Greater widths are not a problem, contact us for special widths over 1000 mm.
If we find that the sizes are different when we template we will re-quote the worktop/s with the exact dimensions.
Add the measurements for each worktop you need to a new line or delete the details if you change your mind.
If we find that the sizes are different when we template we will re-quote the worktop/s with the exact dimensions.
Add the measurements for each worktop you need to a new line or delete the details if you change your mind.
worktop dimensions
You’ve picked your colour, now choose the width - enter the length dimensions in mm - see the price! Just add the measurements for each worktop you need to a new line or delete the details if you change your mind.
You’ve picked your colour, now choose the width - enter the length dimensions in mm - see the price! Just add the measurements for each worktop you need to a new line or delete the details if you change your mind.
Wharf Simple worktops are available in 9 colours and in just two price bands:
A - plain
B - patterned
Click on the colour you want us to quote for to see a larger swatch below. Actual colours may vary slightly from the swatches shown.
A - plain
B - patterned
Click on the colour you want us to quote for to see a larger swatch below. Actual colours may vary slightly from the swatches shown.
wharfsimple solid surface worktops for the price of laminate - HOMES & BARGAINS Special Offer
 |
 |
 |
 |
 |
 |
 |
 |
 |
seamless solid surface worktops
Wharf Simple offer the widest standard worktop on the market, 30 mm thick and available in any width up to 1000 mm. Greater widths are not a problem, contact us for special widths over 1000 mm. All joins are made seamlessly with a chemically welded join – regardless of length or changes of direction!
With 12 mm of acrylic solid surface on an 18 mm moisture resistant substrate, Wharf Simple worktops come with a stunning 10 year warranty as standard, and should last a lifetime.
Wharf Simple worktops include finished ends to worktops, and our sink options include drainer grooves - free of charge!
We offer a full template - fabricate - install service, with only 7-10 days template to install.
Getting your quote couldn’t be easier, follow the steps below. Just call us if you need help.
Wharf Simple offer the widest standard worktop on the market, 30 mm thick and available in any width up to 1000 mm. Greater widths are not a problem, contact us for special widths over 1000 mm. All joins are made seamlessly with a chemically welded join – regardless of length or changes of direction!
With 12 mm of acrylic solid surface on an 18 mm moisture resistant substrate, Wharf Simple worktops come with a stunning 10 year warranty as standard, and should last a lifetime.
Wharf Simple worktops include finished ends to worktops, and our sink options include drainer grooves - free of charge!
We offer a full template - fabricate - install service, with only 7-10 days template to install.
Getting your quote couldn’t be easier, follow the steps below. Just call us if you need help.
